WC06 Panel Wash Liner Enamel Fluid for Gunpla Weathering

WC06 Panel Wash Liner Fluid: Pre Mixed Weathering for Battle Worn Gunpla

Nothing separates a straight from the box build from a display piece like real weathering, and this WC06 panel wash liner fluid is one of the fastest ways to get there. This ready to flow enamel wash is pre thinned and pre pigmented, so you skip the fussy step of mixing your own liner from tube paint and thinner. You uncap it, load your brush or applicator, and let capillary action carry the fluid straight into the recessed detail of your kit. The enamel base is engineered for easy flow and quick drying, which means you spend less time waiting and more time building the grime, staining, and used metal look that makes a mobile suit feel like it has actually seen combat.

Why Enamel Washes Beat Everything for Panel Lining

Enamel liner fluid is the industry standard for weathering because it behaves in a way water based products cannot. It self levels into the fine panel line grooves molded into your plastic, pooling in corners and around raised plating exactly where dirt and shadow would naturally collect. Because the enamel dries slowly enough to work but fast enough to keep your schedule moving, you get a generous window to drag the pigment, feather streaks downward for a rain and rust effect, and pull grime away from high points. When it has set, any excess wipes cleanly off the flat plastic with a cotton swab, leaving crisp definition in every recess.

Building Realistic Rust, Grime and Wear

The WC06 shade is designed for weathering rather than simple lining, so it reads as accumulated filth and oxidation instead of a clean outline. Use it to suggest oil leaks streaking down leg armor, soot around thruster nozzles, mud splashed up from the feet, and the tide marks that build where two panels meet. Because the fluid flows so easily, you can control the intensity by how much you apply and how aggressively you clean back, going from a subtle used look to a heavily abused frontline machine. Layered over a top coated surface, it grips the tooth of a matte finish and lets you slowly build depth pass after pass.

• Pre mixed enamel wash in a generous 40ml bottle, ready to use with no thinning
• Easy flow formula wicks into panel lines and recesses by capillary action
• Quick drying so you can layer streaks and grime without long waits
• Excess wipes off flat surfaces cleanly for crisp, controlled definition
• Perfect for rust, oil, soot, mud and general battle worn realism on Gunpla

Simple Workflow for Clean Results

Start with a fully assembled kit that has a protective matte or satin top coat, since a sealed surface lets the wash move freely and cleans up without staining bare plastic. Touch a loaded brush to the top of a panel line and watch the fluid run along the groove on its own. For weathering effects, dab a little onto raised areas and drag it in the direction gravity would pull, then let it set. Come back with a swab lightly moistened in enamel thinner to soften edges and remove overflow. Repeat until the wear looks right to your eye.

Who This Is For

Whether you are lining your first high grade kit or adding gritty realism to a diorama scale build, this liner fluid gives you a dependable, forgiving weathering tool at a builder friendly price. It pairs naturally with pigment powders and streaking products, and a single 40ml bottle covers many kits, making it a smart staple for any weathering shelf.

Popular alternative: GSI Creos Gundam Marker GM01 Black 3 Pack Panel Lining. Browse our full range of weathering & detailing.

• Scale: 3