Testors Clear Coat Spray Lacquer 3oz

Testors Clear Coat Spray Lacquer 3oz

The Testors Clear Coat Spray Lacquer is a compact three ounce can that delivers a hard, glossy protective finish for your model kits at an unbeatable value. This lacquer based clear coat lays down a tough, transparent shell that shields paint, decals, and detail work from the wear of handling and display. For builders who want dependable protection and a bright, clean shine without a premium price, this is a proven go to that has been a staple on hobby benches for decades.

A Durable Glossy Shell

Lacquer clear coats are prized for their toughness, and this Testors spray is no exception. Once cured, it forms a hard, resilient layer that resists scuffing and protects the surface underneath far better than paint alone. The clear gloss finish deepens colors and gives a wet, polished look that makes metallics and bright color schemes pop. It is also the ideal base layer under a flat or satin coat when you want to seal decals glossy first and then knock the sheen back, a favorite technique for professional results.

Protects Decals and Unifies the Surface

Water slide decals are fragile and lift with the slightest handling, so sealing them is essential. A pass of Testors clear coat locks decals down and blends their carrier film into the surrounding surface, making markings look painted on rather than applied. The clear layer also unifies a build, evening out the mismatched sheens of painted parts, bare plastic, and stickers under one consistent gloss, and it seals panel line work so your shading survives posing and transport.

• Value priced three ounce can ideal for smaller jobs and touch ups
• Hard lacquer formula for a durable, scuff resistant protective shell
• Bright clear gloss that deepens colors and adds a polished shine
• Seals and protects decals and panel line detail from handling
• Works as a gloss base layer before applying a flat or satin coat

Application Guidance

Shake the can well and spray in a ventilated area on a dry day. Hold the can about twenty to twenty five centimeters from the model and apply several light passes, letting each coat flash off before adding the next. Because this is a hot lacquer, always test on a scrap part first and keep coats light on painted surfaces to avoid lifting underlying layers. Avoid high humidity to prevent frosting, and let the finish cure fully before handling the finished piece.

Reliable Protection at a Great Price

Not every project needs a premium can, and the Testors Clear Coat Spray Lacquer proves it. It gives your model kits a hard, glossy, protective finish that seals decals, guards detail, and brings color to life, all in a handy small can that is easy to keep on the bench. Reach for it whenever a build needs a durable clear coat without the cost.

The compact three ounce size makes it especially handy for spot jobs, small scale kits, and quick touch ups where a full size can would be overkill and mostly go to waste. Because it is so affordable, it is also the perfect can to practice your spraying technique on before committing a pricier finish to a showpiece build. Keep one within reach and you will always have a dependable, glossy protective coat ready when a project calls for one.

Popular alternative: Mr. Super Smooth Clear Flat B530 Topcoat. Browse our full range of top coat & finishing spray.

• Scale: 3