Tamiya Epoxy Putty Quick Type Filler

Tamiya Epoxy Putty Quick Type for Sculpting and Repairs

When a lacquer filler is not strong enough and you need material you can actually shape, an epoxy putty is the answer. The Tamiya Epoxy Putty Quick Type is a two part sculpting compound that you knead together by hand, apply while soft, and then work into almost any form before it sets rock hard. Unlike a paste filler that shrinks as solvent evaporates, this epoxy cures through a chemical reaction with virtually no shrinkage, which makes it the right choice for structural repairs, bulk gap filling, and building up shapes that simply are not present on the original kit.

How the Two Part System Works

The putty comes as two colored components. You pinch off equal amounts, knead them together until the color is completely uniform, and the mixing starts a clock. The quick type earns its name by reaching a workable firmness in a reasonably short window and curing fully within a few hours, so you are not waiting overnight to keep building. Wet fingers and tools slightly with water and the material stops sticking, letting you smooth surfaces and press in detail cleanly.

Sculpting, Gap Filling, and Seam Work

This is where an epoxy putty pulls ahead of a simple filler. You can pack it into a wide gap between armor plates, blend it flush, and trust that it will not sag or sink as it cures. You can build up a custom thruster cone, sculpt cabling, or reinforce a weak joint that keeps snapping. For seam removal on thick parts it holds an edge beautifully, and once hardened it sands, drills, files, and scribes just like plastic, so panel lines cut across a repair without crumbling.

• Two part epoxy that cures by reaction with almost no shrinkage
• Quick setting formula reaches workable firmness fast
• Sculpt, fill large gaps, and reinforce weak joints
• Water on tools and fingers gives a smooth, non stick finish
• Hardens fully so you can sand, file, drill, and scribe it

Getting Clean Results

The secret to good epoxy work is patience with the mix and speed with the shaping. Blend the two parts thoroughly, because any streaks of unmixed component will stay soft and never fully cure. Do your rough shaping while the material is soft, then let it firm up partway before carving fine detail, and leave the final sanding until it is completely hard. Keeping a small dish of water nearby to dip your sculpting tools transforms the surface from lumpy to glass smooth with almost no effort.

A Modeler's Problem Solver

For anyone building and modifying plastic kits, epoxy putty is the tool that turns limitations into possibilities. It fixes the parts that break, fills the gaps that paste cannot, and lets you add original detail that makes a build your own. The Tamiya Quick Type keeps that whole process fast and predictable, so you spend your time creating rather than waiting. Keep a pack on the bench and you will reach for it far more often than you expect, from simple structural fixes all the way to full custom conversions.

Popular alternative: Tamiya Epoxy Putty Set with Sanding Sticks. Browse our full range of putty & fillers.

• Scale: 3