{"product_id":"decal-setter-softer-bundle-for-model-kits","title":"Decal Setter \u0026 Softer Bundle for Model Kits","description":"\u003ch2\u003eMark Setter and Softer Bundle for Flawless Decal Work\u003c\/h2\u003e\u003cp\u003eThis two-bottle setter and softer bundle is the foundation of clean, professional decal application on plastic model kits. Whether you are finishing a Gunpla runner build, a scale aircraft, or an armor project, these solutions take the guesswork out of applying markings. The setter improves adhesion and helps thin water slide decals grab onto the surface, while the softer melts the film so it sinks into panel lines, rivets, and curved plating for a painted-on look. Together they turn shiny, floating stickers into tight, seamless markings that read like real factory printing.\u003c\/p\u003e\u003ch2\u003eSetter Versus Softer: What Each Bottle Does\u003c\/h2\u003e\u003cp\u003eThe two products in this bundle serve different jobs, and learning the difference is the key to great results. The setter is applied first, directly onto the model surface, giving the decal a slightly tacky bed to slide onto. It helps the film settle flat and drives out trapped moisture and air so bubbles do not form under the marking. The softer is the more aggressive solution: it chemically relaxes the carrier film so it drapes over compound curves, intake vents, sensor housings, and raised bolt detail without silvering or wrinkling permanently. Used in the right order, the pair makes even large hull numbers and cockpit stencils conform perfectly.\u003c\/p\u003e\u003ch2\u003eWhy This Bundle Suits Curved Plastic Surfaces\u003c\/h2\u003e\u003cp\u003eModel kits are rarely flat. Shoulder armor, thruster nozzles, canopy frames, and cylindrical weapons all present curves that a plain water slide decal fights against. That is exactly where this bundle earns its place on the bench. The softer solution lets stiff film wrap around a rounded surface so the marking looks like it was sprayed on with a mask rather than laid on top. This realistic conformity is what separates a hobby-grade finish from a display-quality one, and it is achieved without heat, special tools, or advanced airbrush skills.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproves decal adhesion so markings will not lift at the edges\u003c\/li\u003e\n\u003cli\u003eSoftens carrier film to hug curves, panel lines, and raised detail\u003c\/li\u003e\n\u003cli\u003eReduces silvering and trapped air bubbles under the film\u003c\/li\u003e\n\u003cli\u003eWorks on Gunpla, aircraft, armor, cars, and other plastic kits\u003c\/li\u003e\n\u003cli\u003eTwo-bottle system covers the full setter-then-softer workflow\u003c\/li\u003e\n\u003cli\u003eFine control for both small stencils and large unit numbers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow to Use for Best Results\u003c\/h2\u003e\u003cp\u003eStart by brushing a thin layer of setter onto the clean area where the marking will go. Slide the decal off its backing paper and into position, then gently blot excess water with a cotton swab or soft tissue. Once the decal is where you want it, apply the softer over the top with a soft brush and leave it undisturbed. As it dries, the film will pull down into the surface detail. Resist the urge to touch or reposition it while the softer is active, as the film becomes delicate. Applied patiently, the marking cures down tight and flat.\u003c\/p\u003e\u003ch2\u003eSeal Everything Under a Top Coat\u003c\/h2\u003e\u003cp\u003eDecals are the last major cosmetic step before protection. After the setter and softer have fully cured and the markings have hardened, seal the whole model under a clear top coat spray. A flat or semi-gloss clear coat unifies the sheen between the decals and the plastic, hides any faint carrier film edges, and locks the markings down so they resist handling wear, dust, and time. This bundle plus a good top coat gives you the complete pathway from bare part to finished, realistic model.\u003c\/p\u003e","brand":"Gunpla Depot","offers":[{"title":"Default Title","offer_id":50097520378095,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/9695\/4351\/files\/320c5fab4609e936786144e42e0fc124_7023630b-246e-44c3-b12e-967f3a276c92.png?v=1783105885","url":"https:\/\/gunpla-depot.com\/products\/decal-setter-softer-bundle-for-model-kits","provider":"Gunpla Depot","version":"1.0","type":"link"}